You are here:
home >
trade >
CWDM SFP+ 10Gbps Optical Transceiver Module
|
|
|
Chengdu Eoptolink Technology
|
CWDM SFP+ 10Gbps Optical Transceiver Module
| Subject: | CWDM SFP+ 10Gbps Optical Transceiver Module |
| Update Date: | 2009-02-17 16:38:56.0 |
| Valid Period: |
Never expired
|
or
or
Description
The EOLP-1696-XX series optical transceiver is designed for fiber communications application such as 10G Ethernet (10GBASE-ER/EW) and 10G Fiber Channel (1200-SM-LL-L), which fully compliant with the specification of SFP+ MSA SFF-8431.
This module is designed for single mode fiber and operates at a nominal wavelength of CWDM wavelength. There are four center wavelengths available from 1270nm to 1330nm, with each step 20nm. A guaranteed minimum optical link budget of 14 dB is offered.
The module is with the SFP+ connector to allow hot plug capability. Only single 3.3V power supply is needed. The optical output can be disabled by LVTTL logic high-level input of TX_DIS. Loss of signal (RX_LOS) output is provided to indicate the loss of an input optical signal of receiver.
This module provides digital diagnostic functions via a 2-wire serial interface as defined by the SFF-8472 specification.
Features
- Supports 9.95Gb/s to 11.1Gb/s Bit Rates
- Hot-Pluggable SFP+ Footprint
- 4-Wavelengths CWDM DFB Transmitter, 1270nm, 1290nm, 1310nm, 1330nm
- 14dB Power Budget at Least
- Duplex LC connector
- Case Operation Temperature Range 0°C to 70°C
- Compliant with SFP+ MSA Specification SFF-8431
- Build-in Digital Diagnostic Functions
- Digital Diagnostic Monitor Interface Compliant with SFF-8472 MSA Specification
Applications
- 10GBASE-ER/EW 10G Ethernet
- 1200-SM-LL-L 10G Fiber Channel
- ITU-T G.709
Didn't find what you're looking for ?
Post a Buying Lead or contact our
customer service specialist
for help!
.jpg)
.jpg)
